FULL BOAR 35-Ton Log Splitter Review

Ever had a round that was easy enough to split but too heavy to lift onto the beam? The FULL BOAR 35 Ton Log Splitter tackles that problem with a hydraulic log lift. It can raise rounds weighing up to 700 pounds, reducing the need to manually lift heavy logs.

With 35 tons of splitting power, it sits well above your typical gas splitter made for home use. This could be a contender for those needing a heavy-duty splitter built around both the force needed to split big rounds and a lift needed to get them into position.

Key Features

• 35-ton splitting force
• Hydraulic log lift
• 2-way, 4-way and 6-way wedges
• 3.55-inch wedge adjustment
• 32-inch log tray
• 18 GPM two-stage pump

Splitting Performance

The FULL BOAR produces 35 tons of splitting force through a 5-inch hydraulic cylinder. Its beam has a maximum log size of 24 inches and a 20 inch max log diameter. This gives it the capacity to handle the large rounds that place more demand on a splitter.

That level of force becomes more relevant with dense hardwoods such as oak, hickory, maple and ash. These species can put more resistance against the wedge than straight-grained softwood. The splitter has enough force for this class of firewood, although the result still depends on the individual round. Straight-grained wood tends to split more easily than a similar-sized round with heavy knots or twisted fibers.

It includes 2-way, 4-way and 6-way wedge options. The 4-way and 6-way wedges can split suitable rounds into multiple pieces in a single stroke. Their multiple cutting points are less effective when knots or twisted grain keep the wood from opening along predictable lines. For difficult rounds, the 2-way wedge provides a simpler splitting path.

Even 35 tons of force will not guarantee a clean split through every difficult round. Large crotch sections and heavily twisted grain can present a different challenge from straight-grained wood. In these cases, the 2-way wedge may be preferable to the 4-way or 6-way options. A second pass may also be necessary when the grain does not open cleanly.

Engine and Hydraulic System

Power comes from a 306cc gasoline engine that drives an 18 GPM two-stage hydraulic pump. The pump provides higher flow when resistance is low, then shifts toward higher pressure as the wedge encounters more resistance. This gives the hydraulic system a faster operating mode before additional pressure is needed to work through tougher wood.

The splitter has a 15-second cycle time, which is about average for a 35-ton model. Some owners describe this pace as slow during long splitting sessions, which becomes more noticeable when working through a large quantity of rounds. This is a mixed blessing though as some people prefer the slower working pace.

Hydraulic Log Lift

The hydraulic log lift makes lighter work of lifting heavy rounds onto the horizontal splitting beam. That matters with the larger rounds this splitter is designed to handle, where getting the wood into position can be a significant part of the work.

Owner feedback includes complaints that the lift table can sometimes move quickly and somewhat jerkily. Moving the control lever gradually gives the operator more control over the lifting speed. This helps prevent rounds from falling off the table when the lift moves quickly.

Moving and Towing

At 912.7 lb, the FULL BOAR is heavy to move by hand. It can be moved around on its wheels, but longer distance transport will normally require a towing vehicle. The 16-inch DOT-approved road tires are sized for a machine of this weight and form part of its road-towing setup.

A 2-inch ball hitch and safety chains provide the towing connection. It has a maximum towing speed of 45 mph. That is a manufacturer-specified limit rather than a recommended travel speed. The weight of the splitter needs to be factored in when planning how and where it will be transported.

Maintenance

Hydraulic maintenance is an important part of running the H6135FB. The machine has a 6.6-gallon hydraulic capacity and comes with premium hydraulic fluid pre-filled in the system. It also uses a built-in suction filter and screen, which protects the hydraulic system without relying on an exposed external filter.

Engine maintenance is simpler. The 306cc engine requires regular oil checks and servicing as part of normal use.

Cleaning matters after splitting, too. Debris should be cleared from the beam, wedge and end plate. Before putting into storage, the wedge should be fully retracted. This protects the hydraulic rod and leaves the splitting area ready for the next use.

Pros and Cons

Final Thoughts on the FULL BOAR 35 Ton Log Splitter

The FULL BOAR H6135FB has a lot going for it for a 35-ton heavy-duty splitter. It is built for situations where large rounds create two problems. They need more force to split, but they can also be difficult to get onto the beam in the first place. Its 35-ton splitting force handles the first problem. The hydraulic log lift addresses the second.

For people who regularly process heavy wood, this dual benefit makes this a powerful and versatile machine.

Frequently Asked Questions